NateMC.com

Nikon Infrared (IrDA) & NoviiRemote for Pocket PC (Last Update 1-1-2006)

Emulate the Nikon ML-L3 / 4730 remote with a Pocket PC and NoviiRemote

What you need
N65N75D70
  • NoviiRemote software for Pocket PC
  • The database I created for NoviiiRemote
  • A Pocket PC with IrDa
  • A computer that will syncronise with your Pocket PC
  • Compatible Camera
    • Nikon N65 / F65
    • Nikon Pronea S (APS)
    • Nikon Nuvis S
    • Nikon Nuvis S 2000
    • Nikon Nuvis V
    • Nikon Lite Touch Zoom 110s QD
    • Nikon Lite Touch Zoom 130 ED / QD
    • Nikon Lite Touch Zoom 150 ED / QD
    • Nikon N75
    • Nikon D70 and D70s
    • Nikon D50

    Looking for a Palm Pilot version?
    Nevo Instructions

 

LT130LT150LT180
if this has been helpful at all, please help out by donating to the phreakiness hosting fund so we can keep this site online.

I have tested this with NoviiRemote 1.3, other versions may or may not work.

The downside with NoviiRemote is that it isn't near as good as OmniRemote is on the Palm Pi
lot, it has no macro functions so you are stuck with only the stuff you could do with the original ML-L3, no timers or anything. If anyone finds any better IrDa software for Pocket PC (Win/ARM) please contact me, freeware version would be ideal.

Installation instructions are included in the zip file with the database

I have added the HEX code for those that were wanting to develop programs for Pocket PCs and hardware devices.

Please note that all information and the hex is subject to license restrictions and is COPYLEFT, you may develop new software and hardware based on this information but you may not charge for the software and it too must be copylefted.

HELP ME WITH THIS PROJECT!!!

If anyone has a different Nikon IrDa device and has captured it's signal with NoviiRemote, please send me the codebase file so I can add it to the database. This also goes for Canon users and anyone who has a camera that can be triggered by Infrared.

My current configuration:
I am currently without a Pocket PC

Instructions for Installing on a Pocket PC with Nevo Software sent in by reader Nick Koss
I prefer a program called Nevo (the one that comes bundled with HP ipaqs), so I fiddled a bit and got it to work thanks to the info supplied on your page. Here is how I did it (in case other people are interested):
1. Downloaded and installed NoviiRemote and your PDB file
2. Opened Nevo, added a new Device (doesn\'t matter which, I used a \'Video Accessory\')
3. Went to \'Edit Key\' mode and chose \'Learn from Remote\'
4. Pressed Learn (this enters Nevo into listening mode)
5. Switched back to NoviiRemote and pressed Enter button while facing a mirror (so the signal bounces back to the Pocket PC :-)
6. Nevo displayed a message confirming the learning of the signal
7. Done!

Please note: For legal reasons Use this file at your own risk, I am not responsible for anything that happens with the use of this file or any information contained on this site. Compaq, iPAQ, Nikon and the makers of NoviiRemote do not endorse this product and all trademarks are property of thier respective owners.


all content and designs are copyright © Nate MC Consulting and MAY NOT be used without written permission, NateMC.com is part of the Phreakiness Media Empire